10
1
Materials Research-ibero-american Journal of Materials Journal
Papers
Publisher
Published Papers
Leonardo Barbosa Godefroid
Deptartamento de Engenharia Metalúrgica e de Materiais, Universidade Federal de Ouro Preto61
Vicente Braz da Trindade Filho
Rede Temat Engn Mat REDEMAT, Univ Fed Ouro Preto56
Betânia Mendes Sena
Univ Fed Ouro Preto55
Sergio Neves Monteiro
Secao de Engenharia Mecanica e de Materiais, Instituto Militar de Engenharia;Departamento de Ciencia e Tecnologia, Instituto Militar de Engenharia;Universidade Estadual do Norte Fluminense Darcy Ribeiro;Universidade Federal do Rio de Janeiro18
Walter José Botta Filho
Centro de Ciências Exatas e de Tecnologia, Universidade Federal de São Carlos17
Wander L. Vasconcelos
Federal University of Minas Gerais17
Paulo Rangel Rios
Escola de Engenharia Industrial Metalurgica de Volta Redonda, Centro Tecnologico,Universidade Federal Fluminense15
Jose Adilson De Castro
Universidade Federal Fluminense13
Mirabel Cerqueira Rezende
AMR/IAE/CTA Praça Marechal Eduardo Gomes 50 Campus do CTA - Vila das Acacias 12228-901 São José dos Campos SP13
Claudio Shyinti Kiminami
Materials Engineering Department, Federal University of São Carlos11
Eduardo Carlos Bianchi
Universidade Estadual Paulista10
Carlos Angelo Nunes
Departamento de Engenharia de Materiais (DEMAR) Polo Urbo-Industrial, FAENQUIL10
Paulo Roberto De Aguiar
Universidade Estadual Paulista10
Aloisio Nelmo Klein
Federal University of Santa Catarina9
Carlos Jose De Araujo
Universidade Federal de Campina Grande;Departamento de Engenharia Mecânica Av . Aprígio Veloso;Departamento de Engenharia Mecânica Av . Aprígio Veloso, Universidade Federal de Campina Grande9
Lalgudi Venkataraman Ramanathan
Instituto de Pesquisas Energéticas;Materials Science and Technology Center;Instituto de Pesquisas Energéticas|Materials Science and Technology Center9
Angelo Fernando Padilha
Departamento de Engenharia Metalúrgica e de Materiais, Universidade de S. Paulo9
Jose Holanda
Universidade Estadual do Norte Fluminense9
Celia Fraga Malfatti
DEMET-PPGEM, Federal University of Rio Grande do Sul l8
José Carlos Bressiani
Instituto de Pesquisas Energéticas e Nucleares8
Luiz Antonio Ferreira Coelho
Centro de Ciências Tecnológicas, UDESC8
Geraldo Lucio de Faria
Universidade Federal de Ouro Preto8
Marcio R. Morelli
Universidade Federal de São Carlos8
Jorge Otubo
Departamento de Materiais e Processo-Divisao de Engenharia Mecanica, Instituto Tecnologico de Aeronautica8
Alexandre Furtado Ferreira
Universidade Federal Fluminense8
J. A. Moreto
EG 85.040-080, Universidade Estadual do Centro Oeste7
Juan Manuel Pardal
Departamento de Engenharia Mecânica, PGMEC7
Hamilton Abreu
Universidade Federal do Ceara7
Ademir J. Zattera
Departamento de Engenharia Química, Universidade de Caxias do Sul7
Edcleide Maria Araujo
Department of Materials Engineering (DEMa), Universidade Federal de Campina Grande7
Carlos Roberto Grandini
Departamento de Física, UNESP7
Milton Sergio Fernandes de Lima
Instituto de Estudos Avançados, Centro Técnico Aeroespacial7
Luiz A. Pessan
Department of Materials Engineering, São Carlos Federal University7
Renate M. R. Wellen
Federal University of Paraiba, UFPB7
Oscar Rubem Klegues Montedo
Universidade do Extremo Sul Catarinense (UNESC)7
Sergio Pezzin
Center of Technological Sciences, Santa Catarina State University7
Amauri Garcia
Departamento de Engenharia de Manufatura e Materiais, Faculdade de Engenharia Mecânica, Universidade Estadual de Campinas7
Uilame Umbelino Gomes
Graduate Program in Materials Science and Engineering (PPGCEM), Federal University of Rio Grande do Norte (UFRN)6
Lilian Ferreira De Senna
Estado do Rio de Janeiro;Departamento de Quimica Anali;Departamento de Quimica Anali, Estado do Rio de Janeiro6
Renato Altobelli Antunes
Instituto de Pesquisas Energéticas e Nucleares6
Lirio Schaeffer
Universidade Federal do Rio Grande do Sul6
Conrado R. M. Afonso
Department of Materials Engineering (DEMa),, Federal University of São Carlos6
Regina Guenka Palma-Dibb
Department of Restorative Dentistry, Ribeirao Preto Dental School-University of Sao Paulo6
Luiz Henrique De Almeida
Department of Metallurgical and Materials Engineering – Alberto Luiz Coimbra Institute for Graduate Studies and Engineering Research-, Federal University of Rio de Janeiro6
Dirceu Spinelli
Engineering School of São Carlos, University of São Paulo Materials6
João Marciano Laredo dos Reis
Universidade Federal Fluminense6
Eliana Duek
Faculdade de Engenharia Mecânica6
Carlos Cairo
Centro Técnico Aeroespacial;Instituto de Aeronáutica e Espaço;Centro Técnico Aeroespacial, Instituto de Aeronáutica e Espaço6
Ronaldo. Sergio de Biasi
Instituto Militar de Engenharia (IME)6
Kurt Strecker
Department of Mechanical Engineering (DEMEC), Federal University of São João del-Rei (UFSJ)6
Dulcina Souza
Departamento de Engenharia de Materiais, UFSCar6
Luis Vicente De Andrade Scalvi
Department of Physics, FC and Graduate Program in Materials Science and Technology (POSMAT), São Paulo State University6
Oscar Balancin
Departamento de Engenharia de Materiais6
Alberto Moreira Jorge
Department of Materials Engineering, Federal University of São Carlos6
Carlos Nelson Elias
Department of Mechanical Engineering and Materials Science, Instituto Militar de Engenharia6
Ignacio A. Figueroa
Department of Engineering Materials, University of Sheffield6
Herman Sander Mansur
Departamento de Engenharia Metalúrgica e de Materiais, Escola de Engenharia, Federal University of Minas Gerais6
Elaine Carballo Siqueira Correa
Centro Federal de Educacao Tecnologica de Minas Gerais6
Rodrigo L. Oréfice
Department of Metallurgical and Materials Engineering, Federal University Minas Gerais6
Yuandong Li（李元东）
State Key Laboratory of Advanced Processing of Non-ferrous Metals and Reutilization, Lanzhou University of Technology6
Elson Longo da Silva
Department of Chemistry, Universidade Federal de São Carlos;Centro de Ciências Exatas e de Tecnologia, Universidade Federal de São Carlos6
Dalva Cristina Baptista Do Lago
Corrosion and Electrochemistry Laboratory (LEC), Rio de Janeiro State University5
Carlos Alberto Fortulan
Laboratório de Tribologia e Compósitos5
Waldek Wladimir Bose Filho
Univ Fed Uberlandia5
Maria Virginia Gelfuso
Functional Materials Development Group (GDMaF), Federal University of Itajubá – UNIFEI5
Elidiane Cipriano Rangel
Instituto de Ciência e Tecnologia de Sorocaba, Universidade Estadual Paulista Júlio de Mesquita Filho5
G.H.D. Tonoli
universidade federal de lavras5
Raul Garcia Carrodeguas
Noricum s.l.5
Paulo Roberto Mei
Faculdade de Engenharia;Mecânica da, Unicamp;Faculdade de Engenharia|Mecânica, Unicamp5
Francisco Antonio Rocco Lahr
Laboratório de Madeiras e Estruturas de Madeiras, Universidade de São Paulo (USP),5
Carlos de Moura Neto
Inst Tecnol Aeronaut ITA5
Silvio Francisco Brunatto
Centro Politécnico, Universidade Federal do Paraná5
Piter Gargarella
Departamento de Engenharia de Materiais;Universidade Federal de São Carlos;Departamento de Engenharia de Materiais, Universidade Federal de São Carlos5
José Antonio Malmonge
UNESP – São Paulo State University5
Fernanda de Carvalho Panzeri Pires de Souza
Department of Dental Materials and Prosthodontics, Ribeirao Preto School of Dentistry, University of Sao Paulo (FORP-USP);Bairro Monte Alegre, CEP5
Yogendra Prasad Yadava
Regional Research Laboratory (CSIR), Trivandrum 695 019, India5
Rafael Farinassi Mendes
Estudante de Graduação em Engenharia Florestal;Departamento de Ciências Florestais;Universidade Federal de Lavras;Departamento de Ciências Florestais, Universidade Federal de Lavras5
Marina Fuser Pillis
Instituto de Pesquisas Energéticas;Materials Science and Technology Center;Instituto de Pesquisas Energéticas|Materials Science and Technology Center5
Antonio Augusto Couto
Instituto de Pesquisas Energéticas e Nucleares, Universidade Presbiteriana Mackenzie5
Luiz Cláudio Pardini
Institute of Aeronautics and Space5
Luis Cesar Rodriguez Aliaga
Rio de Janeiro State University5
Fernando Rizzo
Pontificia Universidade Catolica do Rio de Janeiro5
Daniel Leiva
Departamento de Engenharia de Materiais (DEMA),, Universidade Federal de São Carlos5
Danieli Aparecida Pereira Reis
Universidade Federal de Sao Paulo5
Jefferson Luis Ferrari
Departamento de Ciências Naturais, Universidade Federal de São João del Rei (UFSJ),5
Cecilia Amelia de Carvalho Zavaglia
Faculdade de Engenharia Mecânica5
Eduardo Luis Canedo
Universidade Federal de Campina Grande (UFCG)5
Ivan Bastos
Instituto Politécnico5
Mário Alexandre Coelho Sinhoreti
Department of Restorative Dentistry, Dental Materials Division, Piracicaba Dental School, Universidade Estadual de Campinas5
W. Acchar
Universidade Federal do Rio Grande do Norte5
Daniel Thomazini
Curso de Engenharia de Controle e Automação5
Lourival Marin Mendes
Departamento de Ciências Florestais, Universidade Federal de Lavras5
Tsuneharu Ogasawara
Department of Metallurgical and Materials Engineering, Universidade Federal do Rio de Janeiro — COPPE/UFRJ5
V. Dos Santos
Universit e Orl5
Jane Maria Faulstich de Paiva
Universidade Federal de Sao Carlos5
Paulo Atsushi Suzuki
Departamento de Engenharia de Materiais (DEMAR) Polo Urbo-Industrial, FAENQUIL5
Sibele B. C. Pergher
Departamento de Química, Universidade Regional Integrada do Alto Uruguai e das Missões5
Carlito Calil
Departamento de Engenharia de Estruturas;Avenida Trabalhador Sãocarlense;Departamento de Engenharia de Estruturas, Avenida Trabalhador Sãocarlense5
Jane Zoppas Ferreira
PPGEM, Universidade Federal do Rio Grande do Sul5
Helio De L. Lira
Departamento de Engenharia de Materiais;Universidade Federal de Campina Grande;Departamento de Engenharia de Materiais, Universidade Federal de Campina Grande5
In this study HDPE specimens were fabricated by selective laser sintering using different particle sizes to obtain controlled variations in the porosity. Electron microscopy, density measurements and mechanical analyses were conducted for the characterization of the specimens. Pa...
74
1
Size and external and internal morphologies of nanoparticles and microparticles are very important on the design of drug devices for controlled release. Random enteric copolymers such as poly (methacrylic acid-co-ethyl acrylate) and poly (methacrylic acid-co-methyl methacrylate) ...
3
2
The magnetic behavior and its relationship with microwave absorbing properties have been investigated for doped Z-type barium hexaferrites (Ba3Co1.3Zn0.3Cu0.4Fe24O41)/polychloroprene (CR) nanocomposites.Simultaneous substitutions by Co2+, Cu2+, and Zn2+ ions make possible the use...
13
12
This paper focuses on the synthesis of super-hydrophobic membranes. The polymer used in this research is polystyrene (PS), which has low surface energy but not low enough to be characterized as a superhydrophobic material. As hydrophobicity is based on low energy surface and surf...
5
12
Palygorskite is fibrous clay in which the structural tetrahedral and octahedral layers are organized in a way that structural channels are formed, leading to high surface area. However, impurities inside the channels and aggregated ones considerably reduce the available area. In ...
25
4
Amongst the many parts of a silicon cells photovoltaic module, silicon is the most important and expensive constituent. Thus, research on silicon recycling from damaged cells can lead to economic and environmental benefits. In this work, the broken silicon cells were tailored to ...
0
20
A combination of an extension of the topological instability "λ criterion" and the "average electronegativity" has been recently reported in the literature to predict compositions with high glass-forming ability (GFA). In the present work, both criteria have been applied to selec...
0
3
Chemical Looping Combustion is a promising technology for clean power generation with integrated CO2 capture. In this process the oxygen required for combustion is provided by a metal oxide. This work deals with the development of an experimental procedure to study performances o...
3
5
This study proposes a new pretreatment method that uses alkoxide precursors with a plasticizing agent; the purpose of this study is to improve the electrochemical and mechanical properties of a galvanized steel surface. Galvanized steel was covered with a hybrid film obtained fro...
13
8
The processing of bulk metals through the application of severe plastic deformation leads to significant grain refinement and a consequent strengthening of the material. High-pressure torsion (HPT) generally refers to the processing of disk samples and this technique is especiall...
7
3
Carbon fabric/epoxy composites are materials used in aeronautical industry to manufacture several components as flaps, aileron, landing-gear doors and others. To evaluate these materials become important to know their mechanical properties, for example, the tensile strength. Tens...
73
1
Vertically aligned carbon nanotubes were successfully grown on flexible carbon fibers by plasma enhanced chemical vapor deposition. The diameter of the CNT is controllable by adjusting the thickness of the catalyst Ni layer deposited on the fiber. Vertically aligned nanotubes wer...
8
0
In this study, X-Ray Diffraction (XRD) and Rietveld Refinement were performed to identify and quantify the ferrite and austenite phase of cold and hot rolled duplex stainless steels (UNS S31803) and lean duplex stainless steels (UNS S32304). Electrochemical impedance spectroscopy...
10
1
In this paper, magnesium aluminate spinels were prepared by microwave-assisted combustion, using urea as fuel. In order to evaluate the effect of the urea excess used in the synthesis, its mass was added in a range of 1.0 to 2.5 times the stoichiometric amount required. The mater...
3
11
The present work studied the influence of annealing on a Ni-Ti alloy submitted to uniaxial compression. The stress-strain curve under compression showed the absence of the Stress-Induced-Martensite (SIM) plateau and 42% of remaining austenitic phase (B2). identified by the Electr...
1
18
Single-phase Pb(Fe2/3W1/3)O3 (PFW) multiferroic ceramics doped with magnetic ions were fabricated using a modified B-site precursor method. Dielectric response was investigated over a wide range of temperature and frequency. Doping did not modify the characteristic temperatures (...
6
5
The coatings of FeAlCuCrCoMn high entropy alloy were deposited by direct current magnetron sputtering. The microstructure and the mechanical and corrosion properties of the coatings are investigated. A perfect dense and smooth coating could be obtained. The coatings exhibit singl...
50
3