Chrome Extension
WeChat Mini Program
Use on ChatGLM
VIPCreated with Sketch.

    • Advances in Materials Science and Engineering Journal

    Papers
    A Bridge Deflection Monitoring System Based on Ccd
    Baohua Shan,Lei Wang,Xiaoyang Huo,Wenting Yuan,Zhilin Xue
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING（2016）
    For long-term monitoring of the midspan deflection of Songjiazhuang cloverleaf junction on 309 national roads in Zibo city, this paper proposes Zhang's calibration-based DIC deflection monitoring method. CCD cameras are used to track the change of targets' position, Zhang's calib...
    Cited13Views0
    13
    0
    Download
    BibtexChatPaperRate
    A Modified Method for Hardness Determination from Nanoindentation Experiments with Imperfect Indenters
    Wei Chao Guo, Heng Xu,Xin Qin Gao,Xiao Li Hou,Yan Li
    Advances in Materials Science and Engineering（2016）
    Nanoindentation is an effective nondestructive method for small scale determination of mechanical properties of materials. However, indentation response of metallic materials is very sensitive to indenter tip roundness, size effects, loading rate, and so forth. This study will an...
    Cited20Views0
    20
    0
    Download
    BibtexChatPaperRate
    Luminescence Nanothermometry Based on Pr3+ : LaF3 Single Core and Pr3+ : LaF3/LaF3 Core/Shell Nanoparticles
    M. S. Pudovkin,D. A. Koryakovtseva,E. V. Lukinova,S. L. Korableva,R. Sh. Khusnutdinova,A. G. Kiiamov,A. S. Nizamutdinov,V. V. Semashko
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING（2019）
    Core Pr3+ : LaF3 (CPr = 1%) plate-like nanoparticles (nanoplates), core/shell Pr3+ : LaF3 (CPr = 1%)/LaF3 nanoplates, core Pr3+ : LaF3 (CPr = 1%) sphere-like nanoparticles (nanospheres), and core/shell Pr3+ : LaF3 (CPr = 1%)/LaF3 nanospheres were synthesized via the coprecipitati...
    Cited18Views0
    18
    0
    Download
    BibtexChatPaperRate
    Moisture Sorption Isotherms and Prediction Models of Carboxymethyl Chitosan Films from Different Sources with Various Plasticizers
    Juthamas Tantala,Chitsiri Rachtanapun,Wirongrong Tongdeesoontorn,Kittisak Jantanasakulwong,Pornchai Rachtanapun
    Advances in Materials Science and Engineering（2019）
    Carboxymethyl chitosan (CMCH) from different chitosan sources (shrimp, crab, and squid) and molecular sizes (polymer and oligomer) were synthesized via carboxymethylation reaction. The CMCH films were prepared by solution casting. All the CMCH films had high water solubility, hig...
    Cited23Views0
    23
    0
    Download
    BibtexChatPaperRate
    Weathering Influence on Properties of Siltstones from Istria, Croatia
    Martina Vivoda Prodan,Zeljko Arbanas
    Advances in Materials Science and Engineering（2016）
    Slaking and weathering of weak rocks result in slope instability. Siltstones from flysch rock masses are highly susceptible to weathering, which causes rapid changes in the geotechnical properties and durability. This study investigated siltstone samples of different weathering g...
    Cited17Views0
    17
    0
    Download
    BibtexChatPaperRate
    The Effects of Different Types of Fly Ash on the Compressive Strength Properties of Briquettes
    Ozlem Celik Sola,Murat Yayla,Baris Sayin,Cengiz Duran Atis
    Advances in Materials Science and Engineering（2011）
    The aim of this study is to evaluate the effect of the different types of fly ash on the compressive strength properties of sintered briquettes. Thermal gravimetric (TG) analysis was carried out. The chemical composition and physical properties of the materials used were determin...
    Cited12Views0
    12
    0
    Download
    BibtexChatPaperRate
    Dynamic Compressive Behavior of Recycled Aggregate Concrete
    Long Li, Jianzhuang Xiao, Chi Sun Poon
    Latin American Journal of Solids and Structures（2013）
    This paper presents the experimental results of recycled aggregate concrete (RAC) specimens prepared with five different amounts of recycled coarse aggregate (RCA) (i.e., 0, 25%, 50%, 75%, and 100%) subjected to impact loading based on split Hopkinson pressure bar tests. Strain-r...
    Cited35Views0
    35
    0
    Download
    BibtexChatPaperRate
    Numerical Modeling of Seismic Responses and Seismic Measures of Tunnel Crossing a Fault Zone: A Case Study
    Lin Li,Liping Xian,Chaofan Yao,Deping Guo,Chengliang Liu
    Advances in Materials Science and Engineering（2020）
    The investigation shows that Longxi Tunnel, across a fault zone, was severely damaged during the 2008 Wenchuan earthquake, China. In this paper, the dynamic time history analysis method is used to study the seismic response characteristics of Longxi Tunnel and the aseismic effect...
    Cited13Views0
    13
    0
    Download
    BibtexChatPaperRate
    Molecular Association Studies on Polyvinyl Alcohol at Different Concentrations
    Richa Saxena,S. C. Bhatt
    Advances in Materials Science and Engineering（2018）
    Ultrasonic velocities, densities, and viscosities have been measured for the solution of polyvinyl alcohol in water at concentration range of 0.3% to 1% at temperature 35°C. Ultrasonic velocities have been measured using variable path ultrasonic interferometer at 1 MHz frequency....
    Cited7Views0
    7
    0
    Download
    BibtexChatPaperRate
    Asphalt Concrete Mixtures: Requirements with Regard to Life Cycle Assessment
    Jan Mikolaj,Frantisek Schlosser,Lubos Remek, Aurelia Chytcakova
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING（2015）
    Design of asphalt concrete, required properties of constituent materials and their mixing ratios, is of tremendous significance and should be implemented with consideration given to the whole life cycle of those materials and the final construction. Conformity with requirements f...
    Cited9Views0
    9
    0
    Download
    BibtexChatPaperRate
    Effect of Na Content on the Physical Properties of Ba0.5Sr0.5TiO3 Powders
    Tassanee Tubchareon,Soipatta Soisuwan,Somchai Ratanathammaphan,Piyasan Praserthdam
    Advances in Materials Science and Engineering（2014）
    The different Na contents (0 ≤ Na ≤ 0.35, based on mole of NaOH) of doped Ba0.5Sr0.5TiO3 (BST) powders synthesized via sol-gel process were studied. The substitution of Na+ ions into a partial A-site of BST powders provided the reduction in vacancy defects as confirmed by electro...
    Cited5Views0
    5
    0
    Download
    BibtexChatPaperRate
    Behavior of Hollow Thin Welded Tubes Filled with Sand Slag Concrete
    Noureddine Ferhoune,Meriem Senani,Abdelhamid Guettala
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING（2016）
    This paper presents the axial bearing capacity of thin welded rectangular steel stubs filled with concrete sand. A series of tests was conducted to study the behavior of short composite columns under axial compressive load; the cross section dimensions were 100 × 70 × 2 mm. A tot...
    Cited3Views0
    3
    0
    Download
    BibtexChatPaperRate
    Influence of Microscopic Effects on the Static Tensile Strength of Gray Cast Iron HT200 Specimens
    L. Fan, H. B. Hu, X. S. Tang, J. J. He,W. Chen
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING（2021）
    Gray cast iron HT200 material is a kind of pearlitic gray cast iron. Flake graphite in the gray cast iron greatly destroys the integrity of the matrix and affect the static strength. The influence of microscopic effects on the tensile static strength of gray cast iron HT200 speci...
    Cited3Views0
    3
    0
    BibtexChatPaperRate
    Dc Electrical Ageing of Xlpe under Hydrostatic Pressure
    Fadila Benlizidia Lalam, Faouzi Djemmal
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING（2017）
    The experimental electrical ageing, of cross-linked polyethylene films 100 μm thick, was investigated under high hydrostatic pressure of 300 bar and at atmospheric pressure. The tests are conducted on direct current (dc) for up to 1000 h ageing and at temperature of 70°C. The use...
    Cited3Views0
    3
    0
    Download
    BibtexChatPaperRate
    Experimental Study of Rainfall Infiltration in an Analog Fracture-matrix System
    Zhen Zhong,Huicai Gao,Yunjin Hu
    Advances in Materials Science and Engineering（2021）
    In this study, an experimental apparatus was developed to investigate unsaturated infiltration in an analog fracture-matrix system. Fracture and adjacent matrix is simulated by sands with various particle sizes. Four rainfall infiltration experiments were performed on the analog ...
    Cited42Views0
    42
    0
    BibtexChatPaperRate
    Numerical Simulation Virtual Test of Torsion Shear for Asphalt Mixture
    Jun Xie,Yougang Yang
    Advances in Materials Science and Engineering（2019）
    In order to analyze the torsional shear process of asphalt mixtures in a microscopic view, the numerical simulation of a torsional shear test of an asphalt mixture was carried out by discrete element method. Based on the defects of existing algorithms, the method of random recons...
    Cited3Views0
    3
    0
    Download
    BibtexChatPaperRate
    Structural Dependent Ferromagnetic-Nonmagnetic Phase Change in FePtRu Films
    Takashi Hasegawa, Kosuke Ito
    Advances in Materials Science and Engineering（2017）
    Herein, we studied correlations between crystal structures and magnetic properties of FePt1−xRux films. At room temperature, the chemical disordered A1 films with 0≤x<0.20 and 0.20≤x≤1.00 exhibited ferromagnetic properties and paramagnetic properties, respectively. Curie temperat...
    Cited2Views0
    2
    0
    Download
    BibtexChatPaperRate
    Characterization and Neutron Shielding Behavior of Dehydrated Magnesium Borate Minerals Synthesized Via Solid-State Method
    Azmi Seyhun Kipcak,Derya Yilmaz Baysoy,Emek Moroydor Derun,Sabriye Piskin
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING（2013）
    Magnesium borates are one of the major groups of boron minerals that have good neutron shielding performance. In this study, dehydrated magnesium borates were synthesized by solid-state method using magnesium oxide (MgO) and boron oxide (B2O3), in order to test their ability of n...
    Cited21Views0
    21
    0
    Download
    BibtexChatPaperRate
    Experimental Characterization of Traditional Mortars and Polyurethane Foams in Masonry Wall
    Dora Foti,Michela Lerna,Vitantonio Vacca
    Advances in Materials Science and Engineering（2018）
    Masonry is a composite material largely used in construction. It exhibits several advantages, including significant compressive strength, thermal inertia, and aesthetic beauty. A disadvantage of masonry is mainly related to the inadequate shear strength due to the poor capacity a...
    Cited14Views0
    14
    0
    Download
    BibtexChatPaperRate