Evolution of the Microstructure, Phase Composition and Thermomechanical Properties of the CuZnIn Alloys, Achieved by Thermally Controlled Phase Transitions

Ternary alloys with CuZnIn compositions based on the binary CuZn diagram and the modeled ternary system solidus projection were investigated. The as-cast alloys, hot-rolled sheets, and samples annealed at low temperature were examined. It was found that the α-CuZn solution phase, with minor indium additions (1–2% at.), was the primary phase crystallizing during casting and remained stable at low temperatures. The ternary phase with an approximate composition of Cu8(In,Zn)4.5 and a structure analogous to the high-temperature γ-Cu9In4 phase crystallized from the liquid state and remained stable at low temperatures. This behavior results from the stabilization against peritectoidal decomposition by the Zn atoms when substituting In in the structure. A new phase γ*-Cu9(In,Zn)4 with a modified structure was identified, characterized by a reduced unit cell and an altered electronic structure. The hot-rolling process preserves the phase composition and forms a composite-like structure, with the matrix composition of γ* and large ellipsoidal α-CuZn solution particles. On a microscale, the γ* matrix exhibited a specific structure resulting from segregation processes and was composed of micrometer-sized α-CuZn(In) solution particles and nano-sized β-CuZn phase precipitates. Low-temperature annealing intensifies the γ* matrix decomposition through binary phase precipitation.