Chemiresistive NH3 and H2S sensors based on thin films of vitamin B12 derivatives

Despite the large number of materials, e.g. semiconducting oxides, carbon nanomaterials, conducting polymers and others, that are used as active layers of chemiresistive sensors to ammonia and hydrogen sulfide, the search for new materials remains an urgent task. Special attention is paid to the search for environmentally friendly materials. Corrinoids are naturally occurring coordination complexes consisting of a central cobalt ion and a tetrapyrrole ligand called a corrin ring. Cobalamins and their derivatives are widely used as active layers of optical and electrochemical sensors. At the same time, vitamin B12 derivatives have not been studied as active layers of chemiresistive gas sensors. In this work, films of two vitamin B12 derivatives, viz. dicyanocobyrinic acid heptabutyl ester (DC) and its aquacyano form, aquacyanocobyrinic acid heptabutyl ester (AC), deposited by spin coating and drop casting techniques onto interdigitated electrodes, were tested for the first time as active layers of chemiresistive sensors for the detection of low concentrations of ammonia and hydrogen sulfide (1–50 ppm) in air. It was shown that films of both vitamin B12 derivatives demonstrated reversible sensor response to NH3 and H2S at room temperature. The limit of detection (LOD) of H2S was 0.1 ppm for both vitamin B12 derivatives, while LOD of ammonia was noticeably lower (0.06 ppm) in the case of AC films than in the case of DC films (0.4 ppm). Both sensors demonstrated a fairly low regeneration time, which did not exceed 180 s for 5 ppm of NH3 and 185 s for 5 ppm of H2S.