Design of fluorine-free foam extinguishing agent with high surface activity, foam stability and pool fire suppression by optimization of surfactant composition and foam system

To meet the environmental requirement of foam extinguishing agent, a novel fluorine-free surfactant named amino-terminated polyether modified silicone (ATPMS) was successfully synthesized, and then in combination with hydrocarbon surfactant prepared fluorine-free foam extinguishing agent. The study carefully investigated surface tension, foamability, foam stability and fire extinguishing performance of fluorine-free foam extinguishing agent. The results indicate that ATPMS has a low surface tension of 21.17 mN/m, which combined with hydrocarbon surfactant at the mass concentration ratio of 1:1 imparts high surface activity. The sodium lauryl ether sulfate (AES)/ATPMS system owes the optimal comprehensive performance with an initial foam height value of 85.8mm, a surface tension value of 24.76 mN/m and a foam stability value (the ratio of foam height between initial foam and five-minute foam) of 64.0% at critical micelle concentration (CMC), respectively. Fire suppression test shows that the obtained fluorine-free foam extinguishing agent is effective in fighting diesel pool fires. The firefighting efficiency of foam agent links to the mixing chamber structure of compressed air foam fire extinguishing system (CAFS). When the mixing chamber of CAFS has a recurrent segment length of 50mm and the filled particle size of 10mm, the firefighting efficiency of fluorine-free foam extinguishing agent is optimal with a fire extinguishing time of 33s and a temperature drop rate of 6.49°C/s.