Simulating Multi-Material Specimen Manufacturing from VZh159 and CuCr1Zr Alloys Via SLM Method: Computational Modeling and Experimental Findings

Manufacturing of multi-material products through layer-by-layer synthesis poses various challenges encompassing process parameter optimization, equipment calibration, and the mitigation of warping and internal stresses within the manufactured parts. The article investigates the feasibility of simulating the selective laser melting (SLM) process for manufacturing multi-material components, exemplified through specimens composed of the VZh159 nickel alloy and CuCr1Zr copper alloy. The study entails numerical simulations of the printing process, which were then validated against real specimens produced through SLM. Each test specimen was vertically divided into three parts: the top and bottom sections consisted of the VZh159 alloy, while the central part was composed of the CuCr1Zr alloy. Simulations involved using identical process parameters as employed in the printing process. Thermal and mechanical analyses for each part of the multi-material specimen were sequentially addressed, transferring the outcomes of the preceding analysis as initial conditions for subsequent calculations. The study concludes that while the obtained simulation results are indicative, they do not precisely capture the deformation observed in the specimens manufactured via the SLM method. The numerical values of deformations derived from simulation results slightly underestimate the actual deformations, attributed to limitations in the chosen calculation algorithms. For future utilization of numerical computer simulation in the SLM manufacturing of multi-material specimens, the study suggests the necessity of implementing a seamless, continuous simulation process without transitions between different parts of the specimen. This entails considering the entire manufacturing process without segregating sections, ensuring a comprehensive account of continuous deformation and stress accumulation throughout fabrication.