ANALYSIS OF ADDITIVELY MANUFACTURED AlSi10Mg ALLOY USING X-RAY DIFFRACTION
Journal of the Technical University of Gabrovo(2023)
摘要
This research deals with the study of additively manufactured AlSi10Mg alloy samples by X-ray diffraction. The effect of sample orientation during 3D printing by Selective Laser Melting on the values of macroscopic residual stresses and microstructural parameters and their possible inhomogeneities of the cylindrical sample was investigated. Phase analysis identified the intermetallic phase Mg2Si in addition to the major phases (solid solutions of Al and Si). Tensile residual stresses weredetected in the surface layer for all samples. Inhomogeneities of the investigated parameters of all samples were observed along the circumference of the shank. These effects may be related to the direction of the layers relative to the axis of the sample. These inhomogeneities form so-called microstructural notches or weak spots that are prone to the formation of fatigue cracks, which have a major influence on the fatigue life.
更多查看译文
AI 理解论文
溯源树
样例
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要