Direct Ink Writing of Hierarchical Porous SiC Ceramics As Catalyst Support for Hydrogen Production

Due to the tunable porosity at multiple scales, hierarchical porous ceramics feature large specific surface area and excellent heat and mass transfer performance, which can effectively improve the catalytic reaction performance. This paper presents a method to fabricate SiC scaffolds with regular and hierarchical pore structures by direct ink writing (DIW) combined with sacrificial template technology, which can be used as methanol steam reforming (MSR) microreactor catalyst supports. Through printing along a defined path, primary pores with a regular pore structure were created. After sintering, the sacrificial template was removed and secondary pores appeared. Four different types of hierarchical porous SiC scaffolds were successfully prepared and the pore structure, total porosity, linear shrinkage and compressive strength of these scaffolds were investigated. The catalyst coating was then loaded onto the scaffold, and the microstructure characterization showed that the pore structure would not be damaged and blocked. Finally, the hydrogen production experiments were carried out on the MSR microreactor, and the results showed that the support with larger and denser secondary pores had the best fluid flow and hydrogen production characteristics. At the temperature of 280 degrees C and the gas hourly space velocity (GHSV) of 30000 ml g-1 h-1, the methanol conversion and hydrogen production of the best support can reach 90.95 % and 44.96 ml/min, respectively.