Study on the Mechanical Properties of Roots and Friction Characteristics of the Root–Soil Interface of Two Tree Species in the Coastal Region of Southeastern China

The tensile strength of roots and the friction characteristics of the root–soil interface of tree species are the indicators that play a crucial role in understanding the mechanism of soil reinforcement by roots. To calculate the effectiveness of the reinforcement of soil by tree roots based on essential influencing parameters, typical trees in the coastal region of southeastern China selected for this study were subjected to tests of the tensile mechanical properties of their roots, as well as studies on the friction characteristics of the root–soil interface and the microscopic interfaces. The results indicated that in the 1–7 diameter classes, the root tensile strength of both Pinus massoniana and Cunninghamia lanceolata was negatively correlated with the root diameter in accordance with the power function. The root tensile strength of these two trees, however, was positively correlated with the lignin content but negatively correlated with cellulose and hemicellulose contents. The shear strength at the root–soil interface and the vertical load exhibited a constitutive relationship, which followed the Mohr–Coulomb criterion. As the root diameter increased, both the cohesion and the friction coefficients at the root–soil interface gradually increased, but the growth rate stood at around 15%. The cohesion value of the root–soil interface of the two trees decreased linearly with the increase in soil moisture content within the range of 25 to 45%. At the microinterface, the root surface of C. lanceolata exhibited concave grooves and convex ridges that extended along the axial direction of roots, with their height differences increasing with the enlargement of the root diameter. The rough surface of P. massoniana roots had areas composed of polygonal meshes, with an increase observed in the mesh density with increasing root diameter.