In Situ and Low-Cost Improvement of the Lithium Anode Interface in Garnet-Type Solid-State Electrolytes

In recent years, the development of electric vehicles and environmental concerns have made necessary improvements in the energy density and safety of lithium-ion batteries. Therefore, the development of all-solid-state lithium-ion batteries (ASSLIBs) has become imperative. One advantage of ASSLIBs is their potential for downsizing with the use of lithium metal as the anode. However, in this study, a garnet-type solid electrolyte (Li6.75La3Zr1.75Ta0.25O12) was used, which has low reactivity with lithium metal. Thus, interface modification using CaCl2 was employed to form a Li-Ca-Cl composite anode. The interfacial resistance was remarkably reduced to 7 Omega cm(2), and the symmetric cell exhibited stable cycling for 1200 h at room temperature and a current density of 0.1 mA cm(-2). The voltage ranged from +/- 15 to +/- 16 mV. The full cell demonstrated a high initial discharge capacity of 149.2 mA h g(-1) and a Coulombic efficiency of 98.0% while maintaining a discharge capacity retention of 91.3% after 100 cycles. These findings lay a solid foundation for future commercial applications as interface modification was achieved through a simple spin-coating process using low-cost CaCl2 (0.7 USD g(-1)).