Experimental Recognition of Seismic Performance of Simple Bolt-Connected Precast Frame by Comparing with Equal Stiffness Cast-in-situ Frame

Multi-story industry buildings composed of precast concrete members and simple bolt-type connections are widely constructed in the world, and there is enormous need for future construction market. Based on the equal stiffness and stiffness distribution along the height, a 1/5-scale precast RC frame utilizing simple bolt-type connections and a reference cast-in-situ monolithic RC frame were designed and constructed to conduct shaking table tests. According to the test results, the seismic responses, failure modes and energy dissipation behaviors of the two models were analyzed and compared. The vibration modes of the precast frame performed bending deformation pattern, while the cast-in-situ one presented shear deformation pattern. The damage and inter-story drift of the precast frame was comparatively uniformly distributed along the stories, whereas that of the cast-in-situ frame was concentrated in the first story. The energy dissipation capacity of the precast frame was inferior to that of the reference frame, as the bolt-type connections couldn't have plastic damages and plastic hinges that occurred in the cast-in-situ joint zones. In general, the global seismic performance of the precast frame was close to the reference frame and its collapse resisting capacity under severe earthquakes was reliable. Some serious local failure modes and less of energy dissipation capacity of the precast frame should be concerned in high seismic regions.