Vacuum Melting of Compressed Powders and Hot Rolling of the As-Cast Ti-48Al-2Nb-0.7Cr-0.3Si Intermetallic Alloy: Mechanical Properties and Microstructural Analysis

The amalgamated effect of hot-rolling, rapid cooling and heat treatment on the grain refinement and the resultant mechanical properties of an intermetallic sheet of nominal composition Ti-48Al-2Nb-0.7Cr-0.3Si was investigated. The sheet of 4 mm thickness was fabricated by hot-pack rolling from the vacuum arc remelted (VAR) ingot using a conventional two-high rolling mill. After the final rolling pass, the canned specimen was rapidly cooled in the air to room temperature followed by heat treatment in the alpha + gamma region. The scanning electron microscopy (SEM) micrographs of the as-rolled sheet revealed slightly elongated grains of a typical "duplex (DP)" microstructure with a mean grain size of about 3 mu m which grew to about 4 mu m and became more equiaxed and homogeneous after heat treatment. Moreover, the EBSD micro-texture indicated a weak cube texture in the rolled + heat-treated sheet. Furthermore, the results from the profilometry-based indentation plastometry of the rolled + heat treated specimen illustrated the balanced and improved mechanical properties compared to the as-cast and as-rolled samples, and also those of similar alloy systems found in the literature.