Thermodynamic Modeling and Exergy Analysis of A Combined High-Temperature Proton Exchange Membrane Fuel Cell and ORC System for Automotive Applications

A combined system consisting of a high-temperature proton exchange membrane fuel cell (HT-PEMFC) and an organic Rankine cycle (ORC) is provided for automotive applications in this paper. The combined system uses HT-PEMFC stack cathode exhaust gas to preheat the inlet gas and the ORC to recover the waste heat from the stack. The model of the combined system was developed and the feasibility of the model was verified. In addition, the evaluation index of the proposed system was derived through an energy and exergy analysis. The numerical simulation results show that the HT-PEMFC stack, cathode heat exchanger, and evaporator contributed the most to the total exergy loss of the system. These components should be optimized as a focus of future research to improve system performance. The lower current density increased the ecological function and the system efficiency, but reduced the system's net out-power. A higher inlet temperature and higher hydrogen pressures of the stack and the lower oxygen pressure helped improve the system performance. Compared to the HT-PEFC system without an ORC subsystem, the output power of the combined system was increased by 12.95%.