3D anisotropic TEM modeling with loop source using model reduction method

For model reduction techniques, there have been relatively few studies performed regarding the forward modeling of anisotropic media in comparison to transient electromagnetic (TEM) forward modeling of isotropic media. The transient electromagnetic method (TEM) responses after the current has been turned off can be represented as a homogeneous ordinary differential equation (ODE) with an initial value, and the ODE can be solved using a matrix exponential function. However, the order of the matrix exponential function is large and solving it directly is challenging, thus this study employs the Shift-and-Invert (SAI-Krylov) subspace algorithm. The SAI-Krylov subspace technique is classified as a single-pole approach compared to the multi-pole rational Krylov subspace approach. It only takes one LU factorization of the coefficient matrix, along with hundreds of backward substitutions. The research in this paper shows that the anisotropic medium has little effect on the optimal shift gamma(opt) and subspace order m. Furthermore, as compared to the mimetic finite volume method (SAI-MFV) of the SAI-Krylov subspace technique, the method proposed in this paper (SAI-FEM) can further improve the computing efficiency by roughly 13%. In contrast to the standard implicit time step iterative technique, the SAI-FEM method does not require discretization in time, and the TEM response at any moment within the off-time period can be easily computed. Next, the accuracy of the SAI-FEM algorithm was verified by 1D solutions for an anisotropic layer model and a 3D anisotropic model. Finally, the electromagnetic characteristics of the anisotropic anomalous body of the center loop device and separated device of the airborne transient electromagnetic method were analyzed, and it was found that horizontal conductivity has a considerable influence on the TEM response of the anisotropic medium.