Zirconia nano-powders with controllable polymorphs synthesized by a wet chemical method and their phosphate adsorption characteristics & mechanism

Adsorption is a simple and efficient phosphorus removal method used to control the eutrophication of water bodies. A simple and gentle atmospheric pressure hydrothermal method by adjusting the dosage of ammonium chloride and sodium hydroxide was used to synthesize amorphous, monoclinic, and tetragonal zirconia nanopowders with high specific surface areas (383.91 m(2)/g, 330.01 m(2)/g, and 234.36 m(2)/g) and particle size of about 40 nm for phosphate adsorption. When pH = 6.3, the phosphate adsorption capacity of the amorphous monoclinic phase and the tetragonal phase respectively reached 102.58 mg P/g, 68.11 mg P/g, and 37.25 mg P/g and the adsorption process of the three crystal forms of zirconia powders conformed to the Langmuir adsorption model. In the first 2 min of rapid adsorption, amorphous zirconia completed 76.23% of the adsorption process and the monoclinic phase also completed more than 60%. The adsorption process of the three crystal forms of zirconia was completed within 240 min and conformed to the pseudo-second-order kinetic model. Their adsorption characteristics of the three crystal forms of zirconia decreased with the increase in pH. While the pH was above than the isoelectric point of the solution, the adsorption capacity was significantly reduced. The large specific surface area and high hydroxyl content of the zirconia nano-powder made a great contribution to the adsorption process.