谷歌浏览器插件
订阅小程序
在清言上使用

Development of an Innovative Noise Generation System for Turboprop Aircraft Fuselage Testing

M Dal Borgo,M Alvarez, S Blanco,van Ophem,H Denayer, P dell’Aversana,T Polito, L Staibano, R Bianco,B Peeters,B Pluymers,W Desmet

IOP conference series Materials science and engineering(2022)

引用 0|浏览7
暂无评分
摘要
This paper presents the development of a cabin noise testing equipment that will be used to evaluate the interior noise of regional aircraft as well as to aid the development of noise reduction techniques. The innovative noise generation system consists of three loudspeaker arrays positioned around the fuselage circumference to synthesize a pressure field that is similar to the pressure field seen by the fuselage during a flight. The acoustic pressure field generated by the loudspeakers is measured by a number of microphones scattered on the fuselage surface. These microphone signals are then fed back to the controller with the purpose of minimising the error between the target pressure field and the measured one by means of an iterative learning approach. The number and location of the microphones used in the control loop are selected through a pre-test optimisation analysis, which aims to reduce the time and cost of the set-up. A small-scale electroacoustic demonstrator has been built to develop the feedback control approach. A frequency domain multi-input multi-output feedback controller is used to replicate the random pressure field generated by the turbulent boundary layer excitation. The multi-harmonics of the propeller induced excitation are then added to the time histories of the broadband noise using a time waveform replication technique. Different arrangements of the driving signal distribution are investigated, and the results are then presented in terms of accuracy of the pressure field reproduction.
更多
查看译文
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要