Влияние термического и импульсного лазерного отжига на фотолюминесценцию CVD-пленок нитрида кремния

The light-emitting properties of Si-rich silicon nitride films deposited on the Si (100) substrate by plasma-enhanced (PECVD) and low-pressure chemical vapor deposition (LPCVD) have been investigated. In spite of the similar stoichiometry (SiN 1.1 ), nitride films fabricated by different techniques emit in different spectral ranges. Photoluminescence (PL) maxima lay in red (640 nm) and blue (470 nm) spectral range for the PECVD and LPCVD SiN 1.1 films, respectively. It has been shown that equilibrium furnace annealing and laser annealing by ruby laser (694 nm, 70 ns) affect PL spectra of PECVD and LPCVD SiN 1.1 in a different way. Furnace annealing at 600 °C results in a significant increase of the PL intensity of the PECVD film, while annealing of LPCVD films result only in PL quenching. It has been concluded that laser annealing is not appropriate for the PECVD film. The dominated red band in the PL spectrum of the PECVD film monotonically decreases with increasing an energy density of laser pulses from 0.45 to 1.4 J/cm 2 . Besides, the ablation of PECVD nitride films is observed after irradiation by laser pulses with an energy density of > 1 J/cm 2 . This effect is accompanied by an increase in blue emission attributed to the formation of a polysilicon layer under the nitride film. In contrast, the LPCVD film demonstrates the high stability to pulsed laser exposure. Besides, an increase in the PL intensity for LPCVD films is observed after irradiation by a double laser pulse (1.4 + 2 J/cm 2 ) which has not been achieved by furnace annealing.