Design And Characterization Of A Pneumatic Muscle Actuator With Novel End-Fittings For Medical Assistive Applications

Pneumatic muscle actuators (PMA) are a class of soft actuators known for their high power to weight ratio and inherent compliance. The pneumatic muscle's inherent properties make them very favorable for assistive applications (e.g., medical exoskeletons). This study presents a novel end-fitting design that makes the developed pneumatic muscle actuator lightweight, cost-effective, and modular, thus simplifying the process of assembly and maintenance. The pneumatic muscle actuator assembled using the novel end fittings achieves a shorter overall length without compromising its contraction. The pneumatic muscle actuator has been assembled using a commercial bladder and a braided sleeve alongside a pair of 3D printed novel end-fittings. The paper also details the developed actuator's characterization for force and deflection parameters at various operating pressures. A total of four muscle actuators of varying diameters with constant actuation length (100 mm) were developed and tested to showcase the effect of size on the muscle actuator's behavior. The study presented here also involved comparing three mathematical models developed for pneumatic muscles in order to find a model which closely resembles the developed muscle actuator. Finally, the developed pneumatic muscle actuator's behavior is compared with a commercially available muscle to determine the efficacy of the developed muscle's design. The tests showed that the muscle using a bladder of smaller volume but higher tensile modulus had a higher accuracy and stable performance. As the muscle is intended for medical applications, it was also put through an endurance test with realistic loading and pressure conditions, which revealed very promising results. ? 2021 Elsevier B.V. All rights reserved.