Effect of carbon nitride synthesized by different modification strategies on the performance of carbon nitride/PVDF photocatalytic composite membranes

Carbon nitride (CN)/polyvinylidene fluoride (PVDF) photocatalytic composite membrane (PCM) is considered as a promising candidate to improve the anti-fouling characteristic of conventional PVDF membrane and overcome the difficulty encountered during recovery of powder catalyst simultaneously. However, the effects of differently-modified CN on PCM and its mechanism are still unclear. In this study, bulk-CN (BCN), carbon defects CN (CCN), nitrogen defect CN (DCN), mesoporous CN (MCN), and nitrogen-rich CN (NCN) were incorporated into PVDF by phase inversion method. The influence of changes in the physical and chemical properties of CN, including hydrophilic groups, photocatalytic activity, and particle size, on the permeability, anti-fouling characteristic, and photocatalytic self-cleaning activity of CN/PVDF was systematically analyzed. The mechanism of excellent performance of PCM was revealed by experimental test and theoretical calculation. The flux of PCM was significantly improved by increasing the hydrophilic group on modified CN. However, the differences in particle size and interaction between different types of modified CN and PVDF chains endowed the CN/PVDF with different porosity. DCN/PVDF showed high porosity and hydrophilicity, leading to high water flux and rejection rate of 293.6 L (m2 h)−1 and 90.1%, respectively. Compared to pure PVDF, the flux recovery rate of DCN30/PVDF increased by 27.6%, and the irreversible fouling decreased from 36.9% to 9.2%. The modified CN/PVDF showed excellent photocatalytic activity for the removal of cefotaxime (CFX) and E. coli. Owing to the narrow band gap of DCN, large specific surface area, and low photogenerated carrier recombination rate, the CFX removal rate reached 99% in 2 h, and E. coli inactivation achieved 3.7 log within 4 h via DCN30/PVDF.