Microstructural Evolution of Mg-10Gd-3Y-1Zn-0.4Zr (wt%) Alloy Prepared by Strain-Induced Melt Activation Process

The semisolid billets of Mg-10Gd-3Y-1Zn-0.4Zr (wt%) alloy were prepared by the strain-induced melt activation (SIMA) route, and the effects of isothermal heating parameters on the morphology and coarsening kinetics of primary solid grains were studied. It was found that the average grain size increased with the increase of isothermal time while the grain size showed different changing laws with the temperature at different isothermal times. The growth behavior of the primary solid grains was predominantly governed by the Ostwald ripening mechanism, although there is coalescence mechanism in some cases. As the isothermal temperature increased from 550 degrees C to 590 degrees C, the coarsening rate constant increased continuously and then declined when the temperature was further increased to 610 degrees C. Compared with other SIMA processed magnesium alloys, the present alloy showed a significantly lower grain coarsening rate constant due to the inhibiting effect of rare earth (RE) elements on coarsening. This research has provided an insight into the microstructural evolution of Mg-RE alloy under different heating conditions, and will provide valuable information for potential industrial applications.