Preparation of high-efficiency perovskite solar cells via doping Ag into CuO nanofibers as hole buffer layer

Ag/CuO nanofibers (Nfs) with a diameter of 650 nm were successfully prepared via electrospinning Ag doped CuO nanofibers and then calcined at 450 degrees C for 2 hours. By using Ag/CuO Nfs and PEDOT:PSS as the hole transport layer, an optimum perovskite solar cell power conversion efficiency (PCE) of 11.6% was achieved, which was 33% higher than that of the original perovskite solar cells (8.7%). The devices showed a high PCE because of the high cavity mobility of the Ag/CuO Nfs/PEDOT:PSS films. At the same time, the Ag/CuO Nfs could also slow down the hydrolysis and corrosion of the perovskite by acidic PEDOT:PSS, and increase the environmental stability of the solar cells.