A Method for Reconstructing the Potential Profile of Surfaces Coated with a Dielectric Layer

We propose a method of signal amplification for the scanning probe microscope mode, in which the distribution of the surface potential of a sample is measured simultaneously with topography using a local probe based on a field-effect transistor with a nanowire channel. The application of a method is especially relevant in the study of the electric potential of the surface in the case when it is covered with a dielectric layer that strongly weakens the electric field of the detected electric charges. A key feature of the method is in additional coating the surface of the dielectric layer with thin film of chromium ( R_square>10 k Ω ; a film thickness is ∼7 nm). This film consists of small conductive granules separated by tunnel barriers. It was experimentally shown on the fabricated test structures that a signal attenuated by a dielectric layer can be restored by 70-80% . We estimated the sensitivity of transistors integrated into the probe of a scanning probe microscope in the range of 2-5 mV in single frequency band at a frequency of 100 Hz.