Experimental research on dynamic responses and hydrodynamic pressures of deep-water bridge piers under seismic and wave actions
Engineering Structures(2024)
Abstract
Earthquakes and extreme waves pose significant threats to the safety of offshore bridges, particularly in deep-water environments. The temporal sequence of earthquakes and waves and the specific type of earthquake are critical factors that contribute to the potential risks involved. This study aimed to fill a key knowledge gap by conducting a comprehensive series of physical tests on a deep-water bridge pier at a scale factor of 1:30. White noise tests, shaking table tests, wavemaker tests, and combined shaking table and wavemaker tests were carried out. Near-field pulsed earthquakes, far-field long-period earthquakes and earthquake-wave phase differences were examined in the tests. The test results indicate that the presence of water has a noticeable impact on the natural frequency, particularly the 2nd-order frequency, of bridge piers, which may significantly influence the dynamic responses of high bridge piers. The effects of water–pier interactions are further intensified by seismic actions such as the pulsed Loma Prieta and long-period Chi-Chi earthquakes. Moreover, the earthquake-induced hydrodynamic pressures on the upstream and downstream faces of the pier are nearly identical, whereas there is a notable difference when the pressures are caused by incident waves. The magnitude of the combined earthquake and wave responses in relation to the individual responses is influenced by the earthquake–wave phase differences, and the combined responses are less than the sum of the individual responses.
MoreTranslated text
Key words
Deep-water bridge pier,Underwater shaking table test,Wavemaker test,Dynamic response,Hydrodynamic pressure,Seismic action,Wave action
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined