Study on the effect of ash layer on flow and heat transfer in diesel particulate filter based on 3-d thermal lattice boltzmann method

After the Diesel engine works for a long time, dense ash layer will be formed on the diesel particulate filter surface, which will increase the back pressure on the diesel particulate filter surface and seriously affect the normal operation of the diesel particulate filter. The diesel particulate filter micro-structure is generated by 3-D reconstruction technology. Moreover, the particle layer and ash layer are reconstructed by quartet structure generation set. The exhaust gas with a velocity of 0.05-0.25 m/s is introduced into the diesel particulate filter model. Under the condition of 873 K temperature field, the 3-D lattice Boltzmann method is used to explore the influence of the particle layer and ash layer accumulated in its mi-cro-structure on its flow and heat transfer. The results show that with the accu-mulation of ash, the flow velocity in the diesel particulate filter increases with the decrease of porosity. The existence of ash layer increases the pressure difference between the inlet and outlet of the structure, and the pressure difference between the inlet and outlet of the structure increases with the increase of the air inlet speed. Under the same flow conditions, the heat transfer process of structures con-taining ash stratification is faster, and the highest temperature point moves forward accordingly. This has certain guiding significance for exploring the thermal load of ash diesel structure.