Biofouling Reduction of EPDM by Radiation-Assisted Modification for Water Environment Applications

Ethylene propylene diene elastomer (EPDM) harbors diverse microbiota that form biofilms. Such biofilms may contaminate water and can increase drag force impacting the hydrodynamic performance of a ship, once it is used as fenders. Here, the EPDM surface is modified by radiation-assisted grafting to prevent biofilm formation. Three different monomers, namely, methacrylic acid (MAA), isodecyl methacrylate (IDM), and lauryl methacrylate (LMA), are grafted on EPDM. The modified surfaces are characterized by Fourier transform infrared (FTIR) spectroscopy, surface wettability, mechanical and dynamic mechanical properties (DMA), and scanning electron microscopy (SEM). The modified surfaces are subjected to biofouling by prominent biofilm adherents, that is, Pseudomonas aeruginosa and Klebsiella pneumoniae. The standard plate count and resazurin fluorescence assays are performed to observe the microbial load on these surfaces. The MAA-grafted EPDM, which is hydrophilic in nature, shows a considerable decrease in bacterial adhesion compared to pure EPDM, but for IDM and LMA-grafted EPDM, it is the opposite. The deterioration of the surface with bacteria by environmental scanning electron microscopy (ESEM) supports the findings. The tensile property of the modified EPDM is observed to be within satisfactory limits. After such modification, the EPDM is expected to expand its application.