Analysis of the As-Cast Microstructure and Properties of the Ni-Based Superalloy MAR-M247? Produced Via Directional Solidification
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE(2023)
摘要
The presented research investigates MAR-M247(& REG;) Ni-based superalloy castings produced via directional solidification at various mold preheating temperatures (1510, 1566 & DEG;C) and withdrawal rates (3.4, 5.0 mm/min). Casting analyses were carried out via thermodynamic simulations, differential scanning calorimetry (DSC), X-ray diffraction (XRD), light microscopy (LM), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), scanning transmission electron microscopy (STEM), and tensile testing. On DSC curve, four effects have been registered during cooling: liquidus (1337 & DEG;C), formation of eutectic & gamma; - & gamma;& PRIME; (1315 & DEG;C), precipitation of Ni-7(Hf, Zr)(2) (1244 & DEG;C), and M5B3 borides (1201 & DEG;C). The castings' primary and secondary dendrite arm spacing decreases with increasing withdrawal rates for both shell mold temperatures. The dendritic regions of the castings are characterized by a relatively homogenous microstructure, consisting of & gamma;& PRIME; precipitates surrounded by the matrix, with a mean size in the range of 0.437 to 0.481 & mu;m, depending on the casting parameters. In the interdendritic spaces, & gamma; - & gamma;& PRIME; eutectic, MC carbides, M5B3, Ni-7(Hf, Zr)(2), and M3C2 phases were identified. The ultimate tensile strength of the produced castings was in the range of 970 to 1088 MPa.
更多查看译文
AI 理解论文
溯源树
样例
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要