Stability Control of Overburden and Coal Pillar in the Gob-Side Entry Under Dynamic Pressure
crossref(2022)
摘要
To improve the recovery ratio of coal resources and stress environment of the roadway, gob-side entries have been widely implemented to numerous coal mines in China. Traditional gob-side entry is generally excavated after the gob of the adjacent longwall face is stabilized. To achieve a balance between the seam mining and roadway excavation, numerous mine coals use the method of driving a roadway along the next gob, which heads adjacent to the advancing coal face, and maintaining a narrow coal pillar. Consequently, the dynamic pressure occurs at the gob-side entry; accordingly, the difficulty of roadway maintenance is increased. However, the traditional gob-side entry stability analysis is not applicable to a gob-side entry under dynamic pressure. In this study, the overburden structural model and coal pillar stress model of a gob-side entry under dynamic pressure were established considering the compression load of the immediate roof and gangue and influence law of the cantilever beam length of main roof. Subsequently, thickness, hardness, and deformation of the immediate roof on the stability of the gob-side entry were studied, and the theoretical criterion for the stability of “voussoir beam” structure and coal pillar of the gob-side entry under dynamic pressure were proposed. Based on the geological conditions in tailgate # 110505 of the Yushuling coal mine, reasonable measures were taken considering the aspects of roof cutting and pressure relief, coal pillar design, and surrounding rock reinforcement. After applying the proposed measures, the width of the coal pillar was reduced from 15 m to 4 m. Meanwhile, the grouting cable beam was used to strengthen the roof, and the narrow coal pillar was reinforced by a bidirectional grouting anchor cable was developed. As a result, after the roadway was stabilized, the roof-to-floor convergence and two-side convergence were 268 mm and 105 mm, respectively. Moreover, the stress concentration factor of the coal pillar was 1.20. The stability characteristics of the overburden and coal pillar of the gob-side entry under dynamic pressure were effectively controlled, and remarkable economic benefits were obtained in this coal mine. The techniques proposed for maintaining the stability of the 4 m wide coal pillar and ensuring the bidirectional grouting reinforcement have been successfully applied in a coal mine for the first time, which have high innovation and application values. This study provides a reference for the design and maintenance of the gob-side entry under dynamic pressure.
更多查看译文
AI 理解论文
溯源树
样例
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要