Fabrication of Printable Colorimetric Food Sensor Based on Hydrogel for Low-Concentration Detection of Ammonia.

With the increasing market share of ready-to-cook foods, accurate determination of the food freshness and thus food safety has emerged as a concern. To commercialize and popularize food sensing technologies, food sensors with diverse functionalities, low cost, and facile use must be developed. This paper proposes printable sensors based on a hydrogel-containing pH indicator to detect ammonia gas. The sensors were composed of biocompatible polymers such as 2-hydroxyethyl methacrylate (HEMA) and [2-(methacryloyloxy)ethyl] trimethylammonium chloride (MAETC). The p(HEMA-MAETC) hydrogel sensor with bromothymol blue (BTB) demonstrated visible color change as a function of ammonia concentration during food spoilage. Furthermore, polyacrylonitrile (PAN) was added to improve transport speed of ammonium ions as the matrix in the sensors and optimized the viscosity to enable successful printing. The color changed within 3 min at ammonia concentration of 300 ppb and 1 ppm, respectively. The sensor exhibited reproducibility over 10 cycles and selective exposure to various gases generated during the food spoilage process. In an experiment involving pork spoilage, the color change was significant before and after exposure to ammonia gas within 8 h in ambient conditions. The proposed sensor can be integrated in bar codes and QR codes that are easily mass produced.