Effect of Suspension Clamp Types on the Dynamic Bending Stress of All Aluminium Alloy 1120 Overhead Conductors
IEEE transactions on power delivery(2023)
摘要
Determination of the bending stress is one of the important factors for the design or fatigue assessment of transmission power lines. Researchers and designers calculate the bending stress of overhead conductors by using the Poffenberger-Swart (P-S) formula, which was established for the conductor/metal suspension clamp system. This publication presents experimental work on the effect of different configurations of suspension clamps on the dynamic bending stress that causes fatigue in the conductor. For each type of clamp configuration, specific points of the conductors were instrumented with strain gauges for the measurement of bending strain. The prediction of bending stress by the P-S formula presented errors of up to 140% for clamp different from the one established during the formulation. A better correlation with experimental data was obtained by adjusting considering an effective length of the lever arm for elastomeric clamps.
更多查看译文
关键词
Conductors,Clamps,Bending,Vibrations,Stress,Fatigue,Wires,Armored overhead conductor,elastomeric sus- pension clamp,bending stress
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要