Development of a phased array ultrasound roller probe for inspection of wire + arc additive manufactured components
Journal of Manufacturing Processes(2022)
Abstract
The wire + arc additive manufacturing (WAAM) process, which combines an electric arc as a heat source and metal wire as feedstock is proving to be very effective when producing medium to large scale metal components. The non-destructive testing (NDT) of WAAM parts, while they are being produced, provides early intervention opportunities to rectify manufacturing nonconformities and to perform in-process quality assurance of the parts. This attracts a significant amount of material, time and cost savings. Therefore, this paper presents the research, development and validation of a high temperature phased array ultrasound testing (PAUT) roller probe to perform robotically delivered in-process NDT of WAAM components. The experimental results confirm that the PAUT roller probe can endure surface temperatures up to 350 °C, can be autonomously deployed via a robotic arm and can detect 1 mm diameter flat-bottom holes located 6 mm, 9 mm and 12 mm deep under the unmachined surface of a Ti-6Al-4V WAAM calibration block.
MoreTranslated text
Key words
Phased array ultrasound imaging,Wire + arc additive manufacturing,In-process phased array inspection,Non-destructive testing of additive manufacturing,Ultrasound phased array roller probe
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined