Influence of Gas Temperature and Heat Treatment on Microstructure and Properties of Cold Sprayed Commercially Pure Titanium
Journal of Materials Engineering and Performance(2022)
摘要
Diffusion of oxygen and nitrogen in the cold sprayed commercially pure Ti (CS CP Ti) deposits profoundly impacts their mechanical properties. One plausible approach to additively manufacture a malleable (wrought) and high-density Ti is optimizing CS deposition parameters considering a reduction in porosity for the following heat treatment. Herein, we examined porosity, bulk density, and hardness characteristics of CS CP Ti deposits produced at varying processing gas temperatures (700, 800, and 900°C), which significantly influences the interactions of CP Ti with oxygen and nitrogen. Post-processing heat treatments at 800, 900, and 1000°C were performed in a high vacuum furnace, respectively, which diminished splat boundaries and submicron pores with increasing grain size. SEM images revealed that CS CP Ti had a dense microstructure with low porosity. According to LECO research, low spraying temperatures (i.e. 700°C) maintained oxygen and nitrogen levels in the CS CP Ti deposits at the same level as the stock powders. The bulk density of CS CP Ti produced at 900 °C matched that of wrought CP Ti metal. In addition, to improve the mechanical properties of CS CP Ti deposits, we looked at the link between CS conditions and heat treatment.
更多查看译文
关键词
cold spray,density,gas temperature,hardness,heat treatment,oxygen and nitrogen,porosity,titanium
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要