Evaluation and Characterization of Timber Residues of Pinus spp. as an Energy Resource for the Production of Solid Biofuels in an Indigenous Community in Mexico
FORESTS(2021)
Abstract
This study shows the energy potential of pine wood waste for the production of solid biofuels, and was carried out in an indigenous community in the state of Michoacan. One of the main economic activities of this community is the production of handcrafted furniture, which generates a large amount of wood waste. The most relevant results obtained in this research show that the community generates approximately 2268 kg of sawdust and 5418 kg of shavings per week, and the estimated energy potential per year for both sawdust is 1.94 PJ and for shaving is 4.65 PJ. Based on the particle size observed, the wood residue can be used to generate pellets or briquettes. Other average results in sawdust and (shavings) are the following: initial moisture content 15.3% (16.8%), apparent density 169.23 kg/m(3) (49.25 kg/m(3)), ash 0.43% (0.42%), volatile material 84.9% (83.60%), fixed carbon 14.65% (15.96%), hemicelluloses 12.89% (10.68%), cellulose 52.68% (52.82%), lignin 26.73% (25.98%), extractives 7.69% (10.51%), calorific value 17.6 MJ/kg (17.9 MJ/kg). The major chemical elements in the ash were Al, K. Fe, Ca, P, Na, and Mg. Finally, the results obtained indicate that this biomass can be used to generate pellets or briquettes in this indigenous community.
MoreTranslated text
Key words
lignocellulosic residues,solid biofuels,bioenergy,briquettes,chemical analysis,ultimate analysis
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined