Yaw controller design of stratospheric airship based on phase plane method
Chinese Journal of Aeronautics(2016)
Abstract
Recently, stratospheric airships prefer to employ a vectored tail rotor or differential main propellers for the yaw control, rather than the control surfaces like common low-altitude airship. The load capacity of vectored mechanism and propellers are always limited by the weight and strength, which bring challenges for the attitude controller. In this paper, the yaw channel of airship dynamics is firstly rewritten as a simplified two-order dynamics equation and the dynamic characteristics is analyzed with a phase plane method. Analysis shows that when ignoring damping, the yaw control channel is available to the minimum principle of Pontryagin for optimal control, which can obtain a Bang–Bang controller. But under this controller, the control output could be bouncing around the theoretical switch curve due to the presence of disturbance and damping, which makes adverse effects for the servo structure. Considering the structure requirements of actuators, a phase plane method controller is employed, with a dead zone surrounded by several phase switch curve. Thus, the controller outputs are limited to finite values. Finally, through the numerical simulation and actual flight experiment, the method is proved to be effective.
MoreTranslated text
Key words
Attitude control,Dynamics modeling,Optimal control,Phase plane method,Stratospheric airship
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined