Structure of TiO2 Films Prepared by Using Inductively Coupled Plasma-assisted Chemical Vapor Deposition (ICP-CVD)
Journal of the Korean Physical Society(2011)
摘要
Titanium-dioxide films with anatase and rutile structures were synthesized by using inductively coupled plasma assisted chemical vapor deposition (ICP-CVD) without additional substrate heating. The substrate temperature was increased up to 450 K by plasma heating. Even at such low process temperatures, the deposition rate was high (50 nm/min), as compared to the values reported in the literature. The deposition rate increased significantly at ICP power between 100 and 200 W, where an E-H mode transition from capacitive to inductive coupling occurred. The chlorine concentration was less than 0.5% at ICP powers greater than 200 W. TiO2 films with the anatase phase showed superior hydrophilicity with a water contact angle of < 5 degrees. The rutile phase was formed at low process temperatures (< 450 K) with a high 132 flow rate (30 sccm) and high ICP powers (> 300 W), indicating that a high ion flux is an important factor in rutile formation.
更多查看译文
关键词
TiO2,Anatase,Rutile,Inductively coupled plasma
AI 理解论文
溯源树
样例
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要