Printed Mems Membranes On Silicon
2012 IEEE 25TH INTERNATIONAL CONFERENCE ON MICRO ELECTRO MECHANICAL SYSTEMS (MEMS)(2012)
Abstract
We report a new method for additive fabrication of thin (125 +/- 15 nm thick) gold membranes on patterned silicon dioxide (SiO2) substrates for acoustic MEMS. The deflection of these membranes, suspended over cavities in a SiO2 dielectric layer atop a conducting electrode, can be used to produce sounds or monitor pressure. This process uses a novel technique of dissolving an underlying organic film using acetone to transfer membranes onto SiO2 substrates. The process avoids fabrication of MEMS diaphragms via wet or deep reactive-ion etching, which in turn removes the need for etch-stops and wafer bonding. Membranes up to 0.78 mm(2) in area are fabricated and their deflection is measured using optical interferometry. The membranes have a maximum deflection of about 150 nm across 28 mu m diameter cavities. Young's modulus of these films is shown to be 74 +/- 17 GPa, and their potential sound pressure generation at 15 V is calculated.
MoreTranslated text
Key words
silicon,optical interferometry,young s modulus
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined