Influence of fin arrangement on fluid flow and heat transfer in the inlet of a plate-fin heat exchanger
Journal of Zhejiang University Science(2015)
Abstract
Fin arrangement, which can cause temperature to be distributed non-uniformly and decrease heat exchange efficiency, can also affect fluid flow and distribution in different channels of a plate-fin heat exchanger. To reduce fluid maldistribution, the fluid flow and distribution should be investigated systematically. However, there is as yet no research reported on the fin arrangement effect. We investigated fluid flow and heat transfer at the inlet of a plate-fin heat exchanger by numerical calculation combined with simulation analysis. We simulated the fluid flow under seven kinds of fin arrangement, and analyzed the effects. The distribution of fluid parameters in four monitor positions among three sections was examined when the inlet flow velocity was 1 m/s with an inlet structure arranged with different numbers of fins. Denser fin arrangements among inlet, diversion, and heat exchange sections all intensify the turbulence at the outlet. With increase of arrangement density, the fluid flow direction will be changed and the fluid distribution inside the exchanger will be intensified to equalize the fluid temperature in different channels of the same layer. Furthermore, the effects of 18 combinations of fins in different sections on fluid flow were studied. Fin arrangements in different sections have more significant effect on turbulence than flow velocity and pressure; in comparison with the inlet and heat exchange sections, the diversion section has a significant effect on turbulence at the outlet of the heat exchanger.
MoreTranslated text
Key words
Fin arrangement,Plate-fin heat exchanger,Heat transfer,Turbulence,Temperature equalization
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined