Optimum bias conditions for linear broadband InGaP/GaAs HBT power amplifiers
Microwave Symposium Digest, 2002 IEEE MTT-S International (2002)
摘要
A design strategy for a linear broadband InGaP/GaAs HBT power amplifier is presented. This design takes advantage of the bias dependence of the nonlinear base-collector charge, expressed by the C/sub BC/ vs V/sub CE/ and /spl tau//sub c/ vs I/sub c/ characteristics of the device. Using this technique, it is shown that the second and third order distortions have separate optimum bias conditions, and furthermore, there is an inherent tradeoff in optimizing the second and third order distortions. This strong bias dependence of the nonlinear base-collector charge and the tradeoff between the different orders of distortion are verified on a 24 dBm 0.5-11 GHz distributed power amplifier. To minimize high frequency distortion in HBT amplifiers across a wide range of bias, it is imperative to linearize the base-collector charge, where flat C/sub BC/ vs V/sub CE/ and f/sub t/ vs I/sub c/ characteristics are ideally desired.
更多查看译文
关键词
iii-v semiconductors,mmic power amplifiers,bipolar mmic,circuit optimisation,gallium arsenide,gallium compounds,harmonic distortion,heterojunction bipolar transistors,indium compounds,integrated circuit design,integrated circuit measurement,wideband amplifiers,0.5 to 11 ghz,hbt mmic distributed power amplifier,ingap-gaas,ingap/gaas hbt linear broadband power amplifiers,base-collector charge linearization,design strategy,device characteristics,distributed power amplifier,high frequency distortion,nonlinear base-collector charge bias dependence,optimization tradeoff,optimum bias conditions,second order distortions,third order distortions,bandwidth,voltage,power amplifier,nonlinear distortion,linearity,high frequency,frequency
AI 理解论文
溯源树
样例
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要