Experimental study on opto-acoustic nonlinear frequency-mixing technique with separated basic temperature

Different from the traditional frequency-mixing technique which employs a contacting transducer, the laser-induced acoustic nonlinear frequency-mixing detection technique utilizes a laser source to instigate crack motion and generate acoustic waves. Thus, apart from the temperature oscillation induced by the pump laser, the “basic temperature” originating from the probe laser can also influence the crack. This additional variable complicates the contact state of the crack, yielding a more diverse range of nonlinear acoustic signal attributes. In light of this, our study enhances the conventional opto-acoustic nonlinear frequency mixing experimental setup by integrating an independent heating laser beam. This modification isolates the impact of the “basic temperature” on crack width while also dialing down the probe laser power to mitigate its thermal effects. To amplify the sensitivity of crack detection, we deliberated on the optimal laser source parameters for this setup. Consequently, our revamped system, paired with fine-tuned parameters, captures nonlinear acoustic signals with an enriched feature set. This investigation can provide support for the non-contact opto-acoustic nonlinear frequency mixing technique in the detection and evaluation of micro-cracks.