Tribological and corrosion behavior of hydrided zirconium alloy

Zirconium alloys (Zr-alloy) are used for the core components of nuclear reactors due to their exceptional properties, which make them suitable for the given applications such as low neutron absorption cross-section, good corrosion resistance, good wear resistance, good mechanical stability at high temperatures etc. The coolant water that flows inside the pressure tube contains LiOH to control the pH value of the coolant water, which can cause corrosion. The flow of coolant water produces low amplitude vibration, which can cause fretting wear of the components. Further, the coolant water at high temperature causes the hydride formation in the material, degrading the properties of zirconium alloys. The safe working of nuclear reactors is the prime objective, and the corrosion and wear behavior of the core components must be explored to prevent possible failure. Fretting wear or tribo-corrosion experiments were conducted on Zr-2.5Nb alloy against SS-410 for varied fretting duration to understand the tribological response. Electrochemical corrosion experiments were performed under the aqueous solution of LiOH (10.4 pH) using Electrochemical Impedance Spectroscopy (EIS) and potentiodynamic polarization technique. The comparison was made between the tribological and corrosion response of unhydrided-Zr-2.5Nb alloy (Zr-2.5Nb) and hydrided- Zr-2.5Nb alloy (Zr-2.5Nb-H). The hydride formation causes the reduction in corrosion resistance of Zr-2.5Nb alloy. The oxide layer is formed during the wear and corrosion process which protects the material from further wear and corrosion respectively.