Nuclear magnetic resonance study on wettability of shale oil reservoir

In order to identify and evaluate reservoir wettability, so as to select suitable mining methods to improve oil recovery, wettability evaluation through one-dimensional (1D) and two-dimensional (2D) nuclear magnetic resonance (NMR) technology combined with physical simulation experiments was carried out in this study, and the feasibility of the experimental method was verified by contact Angle method. According to the principle of hydrophilic inorganic content and hydrophobic organic content of shale, the wettability can be evaluated through vacuum self-imbibition oil and self-imbibition water physical simulation experiments combined with 1D NMR technology, that is, total water absorption can be considered as inorganic content, organic content can be obtained by subtracting total water absorption from total oil absorption, and adsorbed oil content can be obtained by subtracting pore volume from total oil absorption. In addition to the wettability measurement by contact Angle method to verify the experimental method, the occurrence ratio of adsorbed oil can also be verified twice by 2D NMR spectrum. The results show that the error between the proportion of adsorbed oil measured by 2D NMR spectrum and that measured by self-imbibition method is within 4%. In the saturated oil-bound water state, the bound water is within the relaxation interval of 110 ms and T2>10 ms. And the relaxation time of aqueous phase moved to the right compared with that in the saturated water state, the interaction force between water and the pore wall was weakened, showing the characteristics of free fluid, and the rock sample became oil-wet, which was consistent with the wettability results measured by contact Angle. Therefore, the wettability of rock samples can be evaluated by 1D NMR technique combined with vacuum imbibition method, or by analyzing the changes of NMR spectra of aqueous phase in completely saturated water and saturated oil-bound water.