Heterojunction and co-catalyst engineering of bismuth vanadate by nickel molybdenum oxide and carbon quantum dot decorations for photoelectrochemical water splitting

Improving the charge diffusion length and water oxidation kinetics of bismuth vanadate (BiVO4) is essential to achieve better photoelectrochemical catalytic ability for water oxidation. Establishing heterojunctions and incorporating co-catalysts with BiVO4 create facile charge transfer paths and generate more water oxidation reactions. In this work, nickel molybdenum oxide (NM) and carbon quantum dot (CQD) are firstly deposited on BiVO4 by hydrothermal and soaking processes to design an efficient co-catalyst/photocatalyst system for water oxidation. The depositing amount of CQD is optimized to balance contributions of CQD and NM as the hole sink and the light-to-electron generator, respectively. The highest photocurrent densities of 2.2 and 3.9 mA/cm2 are achieved for BiVO4/NM/CQD in the electrolyte without and with hole scavenger, respectively. The BiVO4 electrode only shows a photocurrent density of 1.2 mA/cm2 in the electrolyte without hole scavenger. The best photoelectrochemical catalytic ability of BiVO4/NM/CQD is approached by the reduced charge-transfer resis-tance and charge recombination as well as the enhancement on carrier densities. The excellent long-term sta-bility with the photocurrent retention of 90% under illumination for 24 h is also obtained for BiVO4/NM/CQD. This study opens a blueprint on designing efficient catalysts for water oxidation by incorporating heterojunction and co-catalyst materials simultaneously.