Insights into in-situ imbibition behavior of fracturing fluid in propped shale fractures based on nuclear magnetic resonance: A case study from Longmaxi Formation shale, Sichuan Basin, China

Shale gas is an important component of unconventional oil and gas resources. Studying the imbibition behavior is helpful to optimize flowback parameters and enhance gas recovery. Recent imbibition studies have focused on shale matrix, and the pressure conditions discussed were mostly atmospheric. The initial imbibition behavior begins from propped fractures to matrix, but there are few studies working on explaining the imbibition behavior in propped fractures or the phenomenon of many shale wells exhibit higher productivity after a "soaking" period. Therefore, propped fracture samples were designed for imbibition and migration experiments. In order to accurately study the mechanism and main influencing factors of fracturing fluid imbibition and migration in propped and unpropped shale fractures under high temperature and high pressure, a series of experiments based on nuclear magnetic resonance (NMR) were carried out. Results showed that NMR T2 spectra of all samples exhibited a bimodal distribution. The final imbibition volume of fracturing fluid was positively related to pressure and fracture width. The imbibition effect of fracturing fluid was more evident in matrix pores under high pressure. In the migration during soaking stage, the fracturing fluid gradually migrated from large pores to small pores and gradually displaced the shale gas from the matrix, thus allowing the water blocking in propped fractures to self-unlock to some extent. Gas permeability decreased in the imbibition stage, while it recovered in the migration stage to some extent. (c) 2024 The Authors. Publishing services by Elsevier B.V. on behalf of KeAi Communications Co. Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/