An in vitro examination of fluoride ions release from selected materials - resin-modified glass-ionomer cement (Vitremer) and nanohybrid composite material (Tetric EvoCeram)

The aim of this study was to examine a short-term fluoride ions release from selected materials - resin-modified glass ionomer -Vitremer (3M ESPE) and nanohybrid universal composite - Tetric EvoCeram (IvoclarVivadent). Release of fluoride ions (mu g/mm(2)/h) from Tetric EvoCeram and Vitremer into nine environments (artificial saliva - AS, deionized water and 0,9 % NaCl) differing in composition of the solution and pH was determined. Six samples were prepared for each solution. In the short-term study the measurements were taken after 1, 3, 24, 48, 72, 168 hours. The cumulative values as well as levels of fluoride ions released at concrete time intervals were compared. Within 7 days (168 hours) both materials showed variable levels of fluoride ions release. The highest value of fluoride ions release from nanohybrid Tetric EvoCeram material was reported in deionized water (8) after 24 hours (1.550 +/- 0.014 (mu g/mm(2)/h)) and the lowest value was read in the artificial saliva AS pH 7.5 (5) after 1 hour (0.022 +/- 0.001 (mu g/mm(2)/h)). What's more the highest value of F- release from Vitremer was found in deionized water (8) after 168 hours of immersion (24.021 +/- 2.280 (mu g/mm(2)/h)) and the lowest value was in the artificial saliva AS (without Ca2+) pH 4.5 (6) (0.303 +/- 0.249 (mu g/mm(2)/h)) after 168 hours. Cumulated release of F- after 7 days was notably higher from resin- modified glass ionomer material - Vitremer in all artificial saliva solutions (1-7) which imitated the environment of oral cavity. Therefore, we can assume that Vitremer has better remineralization potential and it may constitute a more effective method of tooth decay prevention.