Research on the calculation method of penetration resistance of bucket foundation for offshore wind turbines

The cost of foundations for offshore wind turbines constitutes approximately 35% of the total cost of an offshore wind farm. The bucket foundations show significant potential due to their superior transportation and installation efficiencies compared to pile foundations, leading to potential cost savings for the foundation of up to 30%. For a bucket foundation to be installed successfully, the penetration resistance must be predicted. However, there is currently a lack of clarity on how to select a suitable calculation method for penetration resistance based on known geological parameters to guide construction. In order to evaluate the current methods of calculation for bucket foundation penetration resistance, this study combines theoretical calculation methods with two sets of practical measurement data from the field. The calculation methods of penetration resistance for bucket foundation are first reviewed and categorized. The applicability range of each method and the parameters needed for calculation are given. Next, according to the measured data in the process of penetration of bucket foundation on site, the evolution of compartment pressure, tilt angle, resistance and required suction in the process of penetration are analyzed. Finally, the reviewed methods are compared to the results of two practical projects in order to analyze the differences between them and make recommendations for the calculation technique. The findings can be used as a guide for calculating the bucket foundation's penetration resistance in complex geological conditions.