Co-pyrolysis of biosolids with lignocellulosic biomass: Effect of feedstock on product yield and composition

Co-pyrolysis technology is an effective method to reduce heavy metal concentration in biochar produced from biosolids. In the current study, the effect of co-pyrolysis feedstock on product yield and properties was studied by mixing Biosolids (BS) with Wheat Straw (WS) and Canola Straw (CS) in a 3:1 mass ratio and carrying out thermal decomposition at 700 degrees C in a fluid bed reactor. This study found that the feedstock ash content and the volatile matter had a significant effect on biochar, oil, and gas yields from co-pyrolysis. The results also indicated that the addition of WS and CS feedstock notably reduced As, Cd, Cr, Cu, Ni, Pb, Se, and Zn concentrations in the biochar, due to the net effect of dilution and synergistic effects. BS-WS and BS-CS co-pyrolysis reduced Cu concentration in biochar by 61.6% and 63.3%, respectively, and Zn concentration by 66.4% and 64.4%, respectively. Ligno-cellulosic biomass addition also reduced biochar yield and improved C, H, and N content, along with the calorific value and the thermal stability of biochar. C content was increased by 36.9% in BS: WS biochar and 43.3% in BS: CS biochar compared to solely biosolids' biochar. The calorific value of biochar was increased by 43.5% and 52.9% in BS-WS biochar and BS-CS biochar compared to biosolids' biochar. During co-pyrolysis, CS addition produced oil with the lowest mole percentage of nitrogenated compounds. However, the addition of WS and CS increased co-pyrolysis oil acidity. Biosolids co-pyrolysis with WS and CS also increased the gas yield and the heating value compared to biosolids pyrolysis. Furthermore, the synergistic effect between biosolids and co -feedstocks resulted in increased gas yields and decreased oil and biochar yields.