A Review of Mechanical Properties and Rockburst Investigation of Transversely Isotropic Rocks by Experimental Technique.

Under complex geostress caused by long-term geological evolution, approximately parallel bedding structures are normally created in rocks due to sedimentation or metamorphism. This type of rock is known as transversely isotropic rock (TIR). Due to the existence of bedding planes, the mechanical properties of TIR are quite different from those of relatively homogeneous rocks. The purpose of this review is to discuss the research progress into the mechanical properties and failure characteristics of TIR and to explore the influence of the bedding structure on the rockburst characteristics of the surrounding rocks. First, the P-wave velocity characteristics of the TIR is summarized, followed by the mechanical properties (e.g., the uniaxial compressive strength, the triaxial compressive strength, and tensile strength) and the related failure characteristics of the TIR. The strength criteria of the TIR under triaxial compression are also summarized in this section. Second, the research progress of the rockburst tests on the TIR is reviewed. Finally, six prospects for the study of the transversely isotropic rock are presented: (1) measuring the Brazilian tensile strength of the TIR; (2) establishing the strength criteria for the TIR; (3) revealing the influence mechanism of the mineral particles between the bedding planes on rock failure from the microscopic point of view; (4) investigating the mechanical properties of the TIR in complex environments; (5) experimentally investigating the rockburst of the TIR under the stress path of "the three-dimensional high stress + internal unloading + dynamic disturbance"; and (6) studying the influence of the bedding angle, thickness, and number on the rockburst proneness of the TIR. Finally, some conclusions are summarized.