Self-Lubricating Pulsed Ion Beam-Assisted PTFE Coating of Titanium in Argon Discharge to Tailor Wear Resistance and Friction

COATINGS(2022)

引用 0|浏览3
暂无评分
摘要
Polytetrafluoroethylene (PTFE) ions were deposited on titanium substrate by using a 1.5 kJ Mather plasma focus device in argon, equipped with a PTFE source. The PTFE and argon ions generated during different number of shots of dense plasma focus (DPF) resulted in deposition of PTFE on the Ti surface. Prepared samples were characterized for structural properties, elemental composition, surface morphology, wear resistance and frictional behavior by X-ray diffraction, energy dispersive X-ray, scanning electron microscope and pin on disc test, respectively. The area of the coherent X-ray scattering region of PTFE coated on Ti estimated by XRD is 9 nm. Both XRD and SEM show that the area of the coherent X-ray scattering region increases with the increase in the number of focus shots. The EDX results confirmed that the concentration of carbon and fluorine on the Ti substrate increases with the increase in energy of ion flux. Finally, the pin on disc test confirms that PTFE ion plasma coating on the Ti surface reduces the friction up to 35% and enhances wear resistance of the Ti surface up to 89%. The above analysis reflects that PTFE coating shows remarkable tribological behavior with low value of friction coefficient and enhanced value of wear resistance. Moreover, this study provides an intuition for organizing the design of self-lubricating and effective wear-resistant coatings.
更多
查看译文
关键词
titanium, plasma focus, PTFE ion plasma coating, surface morphology
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要