Position control of XY precision planar motion table based on input shaping filter

In order to solve the vibration problem of mining equipment, a Simulink simulation model of current loop, speed loop and position loop of permanent magnet synchronous motor was established to track the input position signal of the motor system.[1] At the same time, the input shaper is introduced into the motor three loop control model to study the vibration suppression effect of the input shaper.[2] The essence of the input shaper is to filter the input signal. Usually, the parameters of the input shaper need to be accurately identified and the detailed parameters of the system need to be identified. However, the problem that the identification accuracy of the system is not enough often makes the parameters of the shaper uncertain. In view of the problem that the system identification is not accurate, a method of adjusting and setting input shaper parameters is designed, which is not very dependent on the system. The results show that the optimal parameters of the shaper can be selected by the method. Compared with the parameters of the shaper selected according to the identification model, the vibration suppression effect is better.