Numerical research on influence of structural parameters of common-rail injector on injection rate of each nozzle hole

Performance of diesel engines are influenced by fuel spray distribution, fuel-air mixture formation and combustion, which are also influenced by hole-to-hole fuel injection rate from multi-hole injectors. In this study, a customized spray momentum flux experimental test rig was used to measure the transient injection rates from a two-layered 8-hole diesel injector. The results indicated that the fuel injection rate and the cycle fuel injection quantities of the lower-layered nozzle holes were 3–15% higher than the fuel injection rates and the cycle fuel injection quantities of the upper-layered nozzle holes. A three-dimensional (3D) computational fluid dynamics (CFD) model of the two-layered 8-hole diesel injection nozzle was developed and validated by analyzing the relative error between the numerical results obtained from the model and the experimental results measured with the test injector. The simulation results showed that the relative average deviation of hole-to-hole cycle injection quantities were less than ±1%, which is the result of 5% increment in the cross-sectional area of the upper-layered holes.