Electrochemical behaviors and discharge performance of Mg-Sn binary alloys as anodes for Mg-air batteries

In this work, the self-corrosion and discharge performance of the as-cast Mg-xSn (x = 1, 5, 9 wt%) anodes for primary Mg-air batteries were studied through microstructure characterization, electrochemical testing and discharge experiments. With the increase of Sn content, the volume fraction of the Mg2Sn phase increases, promoting dendrite refining. According to the electrochemical test, the Mg-1Sn anode shows a higher open circuit potential, resulting in a stronger electrochemical activity. The polarization curve and electrochemical impedance spectra show the corrosion resistance order as Mg-1Sn > Mg-5Sn > Mg-9Sn. In the discharge measurement, the Mg-1Sn anode achieves the best average discharge voltage, anode efficiency, specific capacity, and energy density under all current densities tested. At 10 mA cm(-2), the energy density of Mg-1Sn is 1239.621 mWh g(-1), which is higher than the Mg-5Sn anode and Mg-9Sn anode, 37% and 25%, respectively. The optimal discharge performance of the Mg-1Sn anode is mainly attributed to the high electrochemical activity and the micron-sized Mg2Sn phase dispersed in the matrix, which facilitates more uniform dissolution.